Nextiva pushes firmware 5.4 when provisioning this device.  In order for this to work, the device needs to be on firmware 4.3.3 or higher.  If your device is not running firmware 4.3.3 or higher it will need to be upgraded before you provision it.  Click here for the manufacturer's steps to upgrade the firmware.

 

1. Obtain the IP address of the device via the boot-up prompt.
   
   NOTE: You can also use a network scanning tool from your computer to find the IP address.
   
   
2. On a computer on the same network as the phone, open a web browser. The phone has to be on the same local network as the computer for this to work. 
   
   
3. Navigate to https://[device IP address] (i.e. https://10.1.10.127).
   
   
4. Log in to the device.  The default password is algo.
   
   
5. Select the Advanced Settings tab.
   
   
6. Select the Provisioning sub-tab.
   
   
7. Set the Server Method to Static.
   
   
   
   
8. Enter the provisioning address in the Static Server field: https://dm.nextiva.com/dms/Nextiva_Service_Provider/Algo/8301PA 
   
   NOTE: Unlike other devices provisioned to Nextiva this device does NOT have a trailing '/' character.
   
   
   
   
9. Change the download method to HTTPS.
   
   
10. Set Validate Server Certificate to Enabled.
    
    
11. Scroll to the bottom of the page and click the Save button.
    
    
12. Scroll to the top of the page and select Reboot.