Panasonic TGP 600 - Provisioning Instructions

Auto Provisioning Instructions

These steps require at least one handset to be paired to the TGP 600 base unit.  For instructions on registering a handset to the base click here.
 

1. Get the IP address of the phone.
    
   1. Press the Menu softkey on a TPA 60 handset paired to the base.
       
   2. Scroll and select System Settings.
       
   3. Scroll and select Status.
       
   4. Scroll and select IPv4 Settings.
       
   5. Scroll and select IP Address.
       
2. Turn on the web interface.
    
   1. Press the Menu softkey on a TPA 60 handset paired to the base.
       
   2. Scroll and select Setting Handset.
       
   3. Scroll and select Other Option.
       
   4. Scroll and select Embedded Web.
       
   5. Select On.
       
3. On a computer on the same network as the phone open a browser and navigate to the IP address of the phone.
    
4. Login using these credentials:
    
   • Username: admin
      
   • Password: adminpass
      
5. Click the Maintenance tab.
    
6. Under Provisioning Maintenance enter the following information
    
   • Standard File URL: https://dm.nextiva.com/dms/Nextiva_Service_Provider/Panasonic/KX-TGP-600/TGP600-{mac}.cfg
      
   • Product File URL: https://dm.nextiva.com/dms/Nextiva_Service_Provider/Panasonic/KX-TGP-600/TGP600-system.cfg
      
7. Click Save.
    
8. After a few minutes, the phone will provision and register. When it does, the status light on the Panasonic KX-TGP600 base unit will turn solid green. The KX-TPA60 handset will not change to reflect the registration of the base unit.