⌕
Contact usContact

Setting Static IP On Cisco SPA phones

Article 000001569 · Updated Nov 5, 2025 · 2,666 views

 

Before proceeding with setting a static IP address on your device, confirm with your network administrator that the IP address you plan to assign is available to use.

Through the Device Settings

SPA Series other than 525

  1. Press the Menu button and choose Network (Option 9). 

    image.png
     
  2. Set Option 1 to Static instead of DHCP.

    image.png
     
  3. Scroll down and set the following
     
    • Non-DHCP IP Address (Option 8)
       
    • Non-DHCP Subnet Mask(Option 9)
       
    • Non-DHCP Default Route (Option 10)
       
    • Non-DHCIP DNS 1 (Option 11)
       
    • Non-DHCP DNS 2(Option 12)
       
  4. Press Save.
     

 

 

SPA 525

  1. Press the Menu button and choose Status (Option 10).

    image.png
     
  2. Select Network Status (Option 2).

    image.png
     
  3. Change Address Type to Static.

    image.png
     
  4. Update the fields:
     
    • IP Address
       
    • Subnet Mask
       
    • Default Router
       
    • DNS 1
       
    • DNS 2
       
  5. Press Save.
     

 

 

Setting in the WebUI

  1. Enter the current IP address into a browser.
     
  2. Choose Admin Login in the upper right-hand corner.
     
  3. Select Advanced View in the upper right-hand corner.
     
  4. Select the System tab.
     
  5. Set Connection Type to Static IP.
     
  6. Fill out the Static IP settings.

    image.png
     
  7. Click Save.
     
Still need help with this?
Contact support