Setting up your Yealink phone (Legacy UI)
Article 000001123 · Updated Sep 23, 2025 · 58,727 views
| This article is a generic guide for provisioning most Yealink phones. For instructions specific to the T44W, T46U, T54W, and T57W click here. |
|---|
Auto Provisioning Instructions
- Obtain the IP address of the phone.
- Press the OK key on the phone.
- Notate the IP address from the device.
- Press the OK key on the phone.
- On a computer on the same network as the phone, open a web browser. The phone has to be on the same local network as the computer for this to work.
NOTE: If the web interface of the Yealink phone reads "This site can't be reached," go to the Menu > Setting > Advanced Setting > Network > Webserver Type and enable the HTTP/HTTPS.
- Login as an administrator. The default credentials are below:
- Username: admin
- Password: admin
- Select the Settings tab at the top of the page. Select Auto Provision on the left.
- NOTE: Some models of phone will not have the Settings tab. In that case you will want to select the Upgrade tab, and then select Advanced.
- NOTE: Some models of phone will not have the Settings tab. In that case you will want to select the Upgrade tab, and then select Advanced.
- In the URL field enter the provisioning URL for the device.
- It is recommended to set DHCP Active to OFF to ensure the device provisions correctly.
- Click Okay or Confirm. The phone should reboot and provision.
- Press the Autoprovision Now or Auto Provision button.
Provisioning URLs
| Nextiva Yealink T19P |
|
|---|---|
| Nextiva Yealink T20P |
|
| Nextiva Yealink T22P |
|
| Nextiva Yealink T26P |
|
| Nextiva Yealink T28P |
|
| Nextiva Yealink T29G |
|
| Nextiva Yealink T32G |
|
| Nextiva Yealink T33G |
|
| Nextiva Yealink T38G |
|
| Nextiva Yealink T41P |
|
| Nextiva Yealink T42G/T40G |
|
| Nextiva Yealink T46G |
|
| Nextiva Yealink T46S |
|
| Nextiva Yealink T48G |
|
| Nextiva Yealink T48S |
|
| Nextiva Yealink W52P |
|
| Nextiva Yealink T58A |
|
Still need help with this?