Poly Rove - Pair/Unpair Handsets

Pairing a Handset

Through the button on the base

1. Press and hold the pairing button on the base unit until the LED starts blinking green.

2. The handset should automatically be in Easy Registration mode and automatically pair with the base.  If it timed out:

   1. Press the Menu button.

   2. Select Settings.

   3. Select Connectivity.

   4. Select Easy Registration.

3. The handset should pair with the base.

From the WebUI

1. Obtain the IP address of the base unit.

   1. From a paired handset, press the menu key.  Click here for instructions to pair a handset to the base.

   2. Dial *47*

   3. A screen will display the MAC and IP address of the connected base.

2. On a computer on the same network as the phone, open a web browser. The phone has to be on the same local network as the computer for this to work. 
   

3. Navigate to https://[device IP address] (i.e. https://10.1.10.127).

4. When prompted, enter the login credentials. The default credentials are:

   • Username: admin

   • Password: admin

5. On the left-hand panel, select DECT Wireless to expand that section.

6. Click on Handset Summary.

7. Scroll until you find Specific Handsets.

8. Check the box for the handset number to register.

9. Click Register.

   

10. The handset should automatically be in Easy Registration mode and automatically pair with the base.  If it timed out:

    1. Press the Menu button.

    2. Select Settings.

    3. Select Connectivity.

    4. Select Easy Registration.

11. The handset should pair with the base.

Unpair a Handset

Through the button on the base

To unpair a handset from the base unit:

1. Press the Menu button.

2. Select Settings.

3. Select Connectivity.

4. Select De-register.

5. Enter the PIN.  The default PIN is 0000.

From the WebUI

1. Obtain the IP address of the base unit.

   1. From a paired handset, press the menu key.  Click here for instructions to pair a handset to the base.

   2. Dial *47*

   3. A screen will display the MAC and IP address of the connected base.

2. On a computer on the same network as the phone, open a web browser. The phone has to be on the same local network as the computer for this to work. 
   

3. Navigate to https://[device IP address] (i.e. https://10.1.10.127).

4. When prompted, enter the login credentials. The default credentials are:

   • Username: admin

   • Password: admin

5. On the left-hand panel, select DECT Wireless to expand that section.

6. Click on Handset Summary.

7. Scroll until you find Handset Status.

8. Select the check box in the Delete column of the handset to unpair from the base.

9. Select Delete.