1. Get the IP address of the phone.
    
   1. Press the Menu softkey on a TPA 60 handset paired to the base.
       
   2. Scroll and select System Settings.
       
   3. Scroll and select Status.
       
   4. Scroll and select IPv4 Settings.
       
   5. Scroll and select IP Address.
       
2. Turn on the web interface.
    
   1. Press the Menu softkey on a TPA 60 handset paired to the base.
       
   2. Scroll and select Setting Handset.
       
   3. Scroll and select Other Option.
       
   4. Scroll and select Embedded Web.
       
   5. Select On.
       
3. On a computer on the same network as the phone open a browser and navigate to the IP address of the phone.
    
4. Log in using these credentials:
    
   • Username: admin
      
   • Password: adminpass
      
5. Click the Telephone tab at the top of the screen.
   
   
    
6. In the Group Handset/Handset select for receiving call table check or uncheck the boxes to adjust what handsets ring for the lines (users) on the phone. In the image below, handset 1 is assigned to ring for only line 1, and handset 2 is assigned to ring only for line 2.
   
   
    
7. Next set the lines each handset can use when calling out using the Handset and Line Number select for making call table.  The checkboxes mark what lines the handset can use, while the dropdown on the far right allows a specific line to be set as default when making a call.  The table below has Handset 2 set to default to using line 2 for outbound calls.
   
   
    
8. Click Save to apply the changes.