Yealink CP935W - Provisioning Information

The device can be provisioned to Nextiva if operating in WiFi mode.  If the device is operating in DECT mode, it will either need to be paired to a W70B base unit or switched to WiFi mode.

Please be aware you need to have the device on firmware version 149.86.0.33 or higher for the WiFi feature to work.  If you purchase this through a third-party, you will be responsible for upgrading the firmware yourself.
 

1. Obtain the IP address of the device.
    
   1. Select More.
       
   2. Select Status.
       
   3. Select General.
       
   4. The IP address will be displayed on the screen.
       
2. Log in as an administrator.  The default credentials are below:
    
   • Username: admin
   • Password: admin
      
3. Select the Settings tab.
    
4. Select Auto Provision.
    
5. It is recommended to disable PNP Active and DHCP active at the top of the page.
    
6. Scroll down and enter the provisioning address into the Server URL text box: https://dm.nextiva.com/dms/Nextiva_Service_Provider/Yealink/CP935W/
    
7. Click Confirm.
    
8. Scroll down and click Auto Provision Now.